How Much Crack Filler Do You Need for Your Asphalt Driveway?
Understanding Crack Filler for Asphalt Driveways
If your asphalt driveway has started to develop cracks, then you need to act quickly to prevent further damage. Left untreated, these cracks can expand and lead to more significant and costly repairs. That’s where crack filler comes in. Crack filler is a product that fills the cracks and prevents water from seeping into the asphalt surface, which can cause more extensive damage.
Calculate the Amount of Crack Filler You Need
Before you start buying crack filler, you must determine the exact amount that you need. Buying too much or too little crack filler will cost you time and money, so it’s essential to get this right. Here’s how to calculate the amount of crack filler you need for your asphalt driveway:
Coverage Rate of Crack Filler
The amount of crack filler you need depends on the coverage rate of the product you choose. Each type of crack filler has a different coverage rate. The coverage rate is the amount of crack filler needed to fill one linear foot of crack for every gallon of product used. The more linear feet a gallon of crack filler can cover, the higher the coverage rate of the product.
For example, a product with a coverage rate of 300 linear feet per gallon will cover 300 linear feet of cracks with one gallon of the product. If you need to fill 600 linear feet of cracks, then you’ll need two gallons of this product to complete the job.
Type of Crack Filler
Another factor that influences how much crack filler you need is the type of product you select. There are three types of crack filler that you can use for your asphalt driveway: cold-pour, hot-pour, and DIY fillers. Each type of product has a different application method, drying time, and coverage rate, resulting in different amounts of the final product you’ll use.
Cold-Pour Crack Filler
Cold-pour crack fillers come in liquid form and are applied directly from the container into the cracks using a spout or a pourable cone. They are the best option for DIYers who want to perform quick and simple repairs. Cold-pour crack fillers have a lower coverage rate compared to hot-pour products, with an average coverage rate of 250 linear feet per gallon.
Hot-Pour Crack Filler
Hot-pour crack fillers come in solid blocks and are melted in a hot pot over a propane burner, an electric element, or a hot oil bath. They are then poured into the cracks using a melter applicator or a pour pot. Hot-pour products have a higher coverage rate than cold-pour products, with an average coverage rate of 400 linear feet per gallon. However, hot-pour crack filler requires specialized equipment and can be more challenging to use for DIYers.
DIY Crack Filler
DIY crack fillers are usually a mix of asphalt binder and sand, or cement, and water, which can be used to fill shallow cracks. These products come in powder form and are mixed with water before application. DIY crack fillers have a lower coverage rate than both cold-pour and hot-pour crack fillers, making them less suitable for larger cracks. Our goal is to offer an all-encompassing learning journey. Access this carefully chosen external website and discover additional information on the subject. crack filler for asphalt https://pavemade.com/collections/asphalt-crack-filler!
Conclusion
Protect your asphalt driveway by repairing its cracks using a crack filler that works best for your situation. Remember to calculate the amount of material you need to prevent overspending or underestimating the amount of material required. By taking the time to do this, you’ll save money and extend the life of your driveway.
To learn more, check out the related posts we suggest to supplement your research:
Investigate this valuable guide
Read this informative document
